Leatherman Bit Kit
With 21 double-ended bits - 42 tools in all, the Bit Kit Set has extended my Wave’s usefulness ten-fold, with all the bits I’ll ever need, and then some.
On first use the bits can be a little difficult to remove from their holders, but they get easier with time. Speaking of time, I’ve only had this kit for a fortnight or so before publication, but in that time I’ve given them some hammer, and so far all the bits I’ve used are holding up very well.
The only problem I’ve found is that they don’t slot into my Wave’s original leather sheath, but you can buy another sheath that fits them all. That said, both holders are slim enough to slip into my pocket without worry.
42 bit options -
Hex 3/32" ; 5/64"
Hex 1/16" ; .050"
Square bit #2 ; #3
Square bit #1 ; pozi #3
Torx #10 ; #15
Torx #20 ; #25
Torx #27 ; #30
Phillips #0 ; #3
Phillips #1 ; #2
Screwdrivers 3/32" ; 1/8"
Screwdrivers 5/32" ; 3/16"
Screwdrivers 7/32" ; 1/4"
Hex 1.5mm ; 2mm
Hex 2.5mm ; 3mm
Hex 4mm ; 5mm
Hex 6mm ; 1/4"
Hex 7/32" ; 3/16"
Hex 5/32 ; 9/64"
Hex 1/8" ; 7/64"
Phillips ; flat tip eyeglasses screwdriver
The Bit Kit works with the following Leatherman tools:
Cam, Charge® AL, Charge® ALX, Charge® Ti, Charge® XTi, Charge®+, Charge®+ G10, Charge®+ TTi, c33B, c33Bx, c55B, c55Bx, e306x, e307x, e33B, e33Bx, e55B, e55Bx, h502, h503, Heritage Charge®+, Heritage Wave®+, MUT®, MUT® EOD, Original Surge®, Piranha 2, Pump, Rail, Removable Bit Driver, Signal®, Skeletool®, Skeletool® CX, Skeletool® RX, Skeletool® SX, Surge®, Wave®+, 2H Wave®+
price: £29.95